Content Migration Manager (CMM)

'An illegal file was given to the tag system' error because of a label on a weld — Content Migration Manager > Knowledge base > I-deas
'Cannot locate source CAD file for part' error when using CMMSolo to migrate an I-deas package file. — Content Migration Manager > Knowledge base > I-deas
"Does not support legacy passport in package file" error when migrating a package file using CMMSolo. — Content Migration Manager > Knowledge base > I-deas
(URG)cmmSolo does not start in Japanese environment. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
[CAD] The Crosshatch and Leader Line are changed by CMM Migration. — Content Migration Manager > Knowledge base > I-deas
[CAD] The crosshatch is changed by CMM Migration. — Content Migration Manager > Knowledge base > I-deas
[CMM] Cannot migrate specific drawing dimesion. — Content Migration Manager > Knowledge base > I-deas
[CMM] CMM migration failed. — Content Migration Manager > Knowledge base > I-deas
[CMM] The problem that migration don't succeed in once. — Content Migration Manager > Knowledge base > I-deas
[CMM]Some horizontal dimensions changed to text above leader — Content Migration Manager > Knowledge base > I-deas
[Problem]The body is missing when the user migrate test.pkg by using CMM Solo. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
[URGENT]Can not migrate IDEAS Assembly "The BVR is not checked out" — Content Migration Manager > Knowledge base > I-deas
1. New features — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration
10. Migrating Pro/ENGINEER data — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part IV: Pro/ENGINEER to NX migration
11. CMM options – Pro/ENGINEER — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part IV: Pro/ENGINEER to NX migration
12. Migrating CATIA data — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration
13. CMM options – CATIA V4 — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration
14. CMM options – CATIA V5 — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration
15. Migrating SolidWorks data — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VI: SolidWorks to NX migration
16. Options – SolidWorks — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VI: SolidWorks to NX migration
2. Release notes — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration
3. Getting Java heap issue or CMM crashes , if the files with instances (around — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
3. Configuration guide — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration
4. Migration Tools — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process
5. Migration Overview — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process
6. Data migration process — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process
7. Best practices — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process
8. Migrating I-deas data — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part III: I-deas to NX migration
9. CMM options – I-deas — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part III: I-deas to NX migration
A. CMM Solo — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices
A. Identify data to migrate — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 6. Data migration process
ACF CMM migration gives Memory Access Violation error — Content Migration Manager > Knowledge base > I-deas
ACF CMM migration gives Memory Access Violation error — Content Migration Manager > Knowledge base > I-deas
Adulterate dimensions — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
After converting the SW drawing through CMM, views in the drawing appear as sketches instead of proper views. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
After migration all symbol instances get moved to layer 1 — Content Migration Manager > Knowledge base > I-deas
All I-deas data are not listed in CMM Solo window. — Content Migration Manager > Knowledge base > I-deas
All I-deas data are not listed in CMM Solo window. — Content Migration Manager > Knowledge base > I-deas
Apache License — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Preface > Software Copyright and Trademark Notices
Application — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 13. CMM options – CATIA V4
Arrows for the section view not created — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Assembly fails to load two of three components after CMM traslation. — Content Migration Manager > Knowledge base > SolidWorks
Attributed symbol is incorrectly migrated — Content Migration Manager > Knowledge base > I-deas
Attributed symbol migrates with duplicate values. — Content Migration Manager > Knowledge base > I-deas
Audience — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Preface
B. Batch migration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices
B. Migrate data — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 6. Data migration process
Before you migrate — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Best practices – CATIA — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 12. Migrating CATIA data
Best Practices – I-deas — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part III: I-deas to NX migration > 8. Migrating I-deas data
Best practices – Pro/ENGINEER — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part IV: Pro/ENGINEER to NX migration > 10. Migrating Pro/ENGINEER data
Best practices – SolidWorks — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VI: SolidWorks to NX migration > 15. Migrating SolidWorks data
BOM Balloon - Leader lines are getting inside the Balloons after the Migration — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Border arrow and logo are not solid filled when using Inch template. — Content Migration Manager > Knowledge base > I-deas
BT 29091 - Catia drawing locked view processing not as expected — Content Migration Manager > Knowledge base > CATIA
Bundle Segment in main assembly file not generated after CMM translation. — Content Migration Manager > Knowledge base > CATIA
Business object: CMM2Session — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Business object
Business object: CMM2SessionForm — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Business object
Business object: CMMAttributes — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Business object
Business object: CMMAttributesForm — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Business object
C. Approve migrated data — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 6. Data migration process
C. Command line report utility — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices
Cabling Cosmetic Features like Marker in Harness Migration support from Creo — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Can't update Tc 10.1.0 -- list_users.exe hangs — Content Migration Manager > Knowledge base > I-deas
Cannot run CMMsolo — Content Migration Manager > Knowledge base > I-deas
Catia Assembly constraints are not migrated — Content Migration Manager > Knowledge base > CATIA
Catia Assembly with virtual components loose assembly constraints — Content Migration Manager > Knowledge base > CATIA
Catia CMM unexpected position Override in Top Assembly — Content Migration Manager > Knowledge base > CATIA
CATIA new features — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 1. New features
Catia Ordinate Dimension Issues — Content Migration Manager > Knowledge base > CATIA
Catia pattern information lost — Content Migration Manager > Knowledge base > CATIA
Catia Translate being migrated as Instance Geometry — Content Migration Manager > Knowledge base > CATIA
Centerlines and center marks are not migrating correctly. — Content Migration Manager > Knowledge base > I-deas
Check-mate testing — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Class: CMM2Session — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Class
Class: CMMAttributes — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Class
Classic LOV: CMM DataType — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Classic LOV
Classic LOV: CMM ReportStatus — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Classic LOV
Classic LOV: CMM ReviewStatus — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Classic LOV
Client FCC error during CMM migrations — Content Migration Manager > Knowledge base > I-deas
CMM - Migration Ideas nach NX - 2tier Client friert ein — Content Migration Manager > Knowledge base > I-deas
CMM - This product is not supported in a 4-tier Teamcenter environment — Content Migration Manager > Knowledge base > I-deas
CMM : Fail to subtract body — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM (i-deas 2 NX) : memory access viloation while migration of an ACF target — Content Migration Manager > Knowledge base > I-deas
CMM [An attempt was made to associate an object with a second other object] — Content Migration Manager > Knowledge base > I-deas
CMM 10.0.1 Silent Installation will install SW always in "C:\Program Files\" — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM 10.0.2.1 InstalllOptions.txt file lists the incorrect variable for TC_ROOT. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM 10.0.3.1r1 crashes teamcenter — Content Migration Manager > Knowledge base > I-deas
CMM 11 is not creating BOM for some migrated Creo drawings. — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM 11 remigration part failed — Content Migration Manager > Knowledge base > I-deas
CMM 12 Migration drawings, nested symbols faild — Content Migration Manager > Knowledge base > I-deas
CMM 1872 menu will not appear in TC 12.2 patch 3. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM 1899 fails to import / upload migrated part for some design revisions — Content Migration Manager > Knowledge base > I-deas
CMM 1921 install notes and release notes — Content Migration Manager > Product documentation
CMM 7.5.2 unable to migrate Drawing that migrated in CMM 6.0.2 — Content Migration Manager > Knowledge base > I-deas
CMM 7.5.4 and NX7.5.5.4 MP7 does not migrate I-deas drawings with symbols — Content Migration Manager > Knowledge base > I-deas
CMM 8.5.x needs to be supported by Teamcenter 10.1 — Content Migration Manager > Knowledge base > I-deas
CMM 9 => Extrude Until Next not honored! — Content Migration Manager > Knowledge base > I-deas
CMM 9.0.3 fails to migrates assemblies containing pre MS6 constrains — Content Migration Manager > Knowledge base > I-deas
CMM Catia - bold circle centerline result in FallbackSketch — Content Migration Manager > Knowledge base > CATIA
CMM Catia Imprecise Constraint Issue — Content Migration Manager > Knowledge base > CATIA
CMM CATIA Part fails to translate — Content Migration Manager > Knowledge base > CATIA
CMM CATIA V5: the feature translation hangs converting a sketch — Content Migration Manager > Knowledge base > CATIA
CMM Catia, FTA Information from Catia are not migrated in NX PMI — Content Migration Manager > Knowledge base > CATIA
CMM Catia: detail views contains no geometry — Content Migration Manager > Knowledge base > CATIA
CMM Catia: ELY_ENTITY_CARTOON - Groups in Drawings — Content Migration Manager > Knowledge base > CATIA
CMM Catia: Failed to generate EPF — Content Migration Manager > Knowledge base > CATIA
CMM Catia: multiple overlapping centerlines/centermarks — Content Migration Manager > Knowledge base > CATIA
CMM Catia: View boundaries — Content Migration Manager > Knowledge base > CATIA
CMM Catia: View Breaks - hidden annotations — Content Migration Manager > Knowledge base > CATIA
CMM Catia: View Breaks in Revolved Section View — Content Migration Manager > Knowledge base > CATIA
CMM Catia: Views defect after Migration — Content Migration Manager > Knowledge base > CATIA
CMM Catia: after the CMM Migration Catia Flexible components lose these properti — Content Migration Manager > Knowledge base > CATIA
CMM Catia: CMM in batch mode stops migration with the message "Log out". — Content Migration Manager > Knowledge base > CATIA
CMM Catia: Views outside the drawing frame are not transformed correctly — Content Migration Manager > Knowledge base > CATIA
CMM change ItemName to ItemId during migration — Content Migration Manager > Knowledge base > I-deas
CMM conversion breaks positioning — Content Migration Manager > Knowledge base > CATIA
CMM conversion does not finish — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM conversion in feature mode will produce only brep in NX — Content Migration Manager > Knowledge base > CATIA
CMM converted drawings are distorted and some features are not migrated from SolidWorks to NX — Content Migration Manager > Knowledge base > SolidWorks
CMM Creo - Allow Assumptions not migrated to NX Align/Lock — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - Angular dimensions are incorrectly migrated — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - Assembly Pattern Feature issue — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - CMM Creo - enhance to have Pro/Engineer-Creo Joints migrated to NX — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - Constraint angle is not migrated — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - Datum Feature Symbol not migrated to NX — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - Exploded Views — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - missing centerlines in drawings — Content Migration Manager > Knowledge base > CATIA
CMM Creo - Pattern Feature unsupportet for Assembly Cut — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - Secondary geometry in view — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - simplified representation — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - Threads in parts duplicated — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - too many drawing views migrated — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo - View Dependent Edit — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo 4 Assembly constraint axis to axis missing — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Creo 4 Assembly Constraints on threads are missing — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM CREO3 - NXService.exe hangs converting a SURFACE FILLET — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM defaults defaults to using the out-of-date seed parts. — Content Migration Manager > Knowledge base > CATIA
CMM delete a Component from BOM. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Cmm Example#2 Drawing with Weld Symbols — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM fails when migrating an Ideas drawing to NX — Content Migration Manager > Knowledge base > I-deas
CMM for Catia V5 after Fidelity Error, don't created BREP — Content Migration Manager > Knowledge base > CATIA
CMM for ideas not working — Content Migration Manager > Knowledge base > I-deas
CMM general new features — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 1. New features
CMM Handling of circular references in ProE — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Hangs during Migration of Catia Data — Content Migration Manager > Knowledge base > CATIA
CMM hangs during the migration of Creo assembly — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM hangs during the migration of Creo parts to NX — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM hangs during the migration of drawings from creo to NX — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM I-deas: Fidelity Check Failed — Content Migration Manager > Knowledge base > I-deas
CMM Ideas: Surface Finish Symbols do not migrate correctly — Content Migration Manager > Knowledge base > I-deas
CMM installation help needed — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM integration with Teamcenter not translating Ideas dataset to NX dataset — Content Migration Manager > Knowledge base > I-deas
CMM interface does not launch — Content Migration Manager > Knowledge base > I-deas
CMM Lost BOM of ProE assembly after CMM migration crashes — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM managed Mode stuck (CMMsolo works) — Content Migration Manager > Knowledge base > SolidWorks
CMM migrated drawing is imported to Teamcenter, drawing view is deleted. — Content Migration Manager > Knowledge base > I-deas
CMM migrates Catia drawing without views, and delete Realation to 3D model — Content Migration Manager > Knowledge base > CATIA
CMM Migrating CATIA Drawing to NX - Views and texts are not migrated correctly — Content Migration Manager > Knowledge base > CATIA
CMM Migration converted Inch model to metric model — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM Migration from I-DEAS to NX fails: System error during part import — Content Migration Manager > Knowledge base > I-deas
CMM Migration issue with Locked instances in Creo files — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Migration issue with sketch position and pattern feature — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Migration-Bug with Teamcenter 11.6.0.10 — Content Migration Manager > Knowledge base > I-deas
CMM option cannot be used in Japanese environment. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM performance issues — Content Migration Manager > Knowledge base > SolidWorks
CMM Pro/E Assembly Drawing issue - Exploded View — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Pro/E assembly issue with position override — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Pro/E Assembly Migration issue - cannot create constraints — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Pro/E AssemblyConstraintsSetToArrangementSpecific — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM problem: I-deas Symbol Instance is missing in NX Migrated Symbols — Content Migration Manager > Knowledge base > I-deas
CMM problem: Symboldefinitions with Areafill — Content Migration Manager > Knowledge base > I-deas
CMM ProE error message is the same for all types of problems — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM PROE Error: Cannot locate exchange file — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Proengineer issue — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM removes properties when use allow_null_vlaue in attribute mapping. — Content Migration Manager > Knowledge base > I-deas
CMM Report error in Max Deviation. — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM Session failures, when attempting to migrate drawing — Content Migration Manager > Knowledge base > I-deas
CMM Solidworks not able to load Solidworks top level assembly. — Content Migration Manager > Knowledge base > SolidWorks
CMM Solidworks Option "Migrate All Top Level Configurations" does not work — Content Migration Manager > Knowledge base > SolidWorks
CMM Solo and NXM Solo — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > A. CMM Solo
CMM Solo SolidWorks : incorrect translation of extrude feature — Content Migration Manager > Knowledge base > SolidWorks
CMM Solo Solidworks : Issue with Base Flange translation — Content Migration Manager > Knowledge base > SolidWorks
CMM solo Solidworks NX issues with extrude feature definitions "Blind" — Content Migration Manager > Knowledge base > SolidWorks
CMM solo Solidworks NX issues with extrude feature definitions "Through all" — Content Migration Manager > Knowledge base > SolidWorks
CMM takes very long time to migrate a small part — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM_1980.2: After Migration of Drawing, In NX drawing misst Option "Visible only — Content Migration Manager > Knowledge base > CATIA
CMM_1980.2: Missing "Component is Reference Only" after Migration of Drawing wit — Content Migration Manager > Knowledge base > CATIA
CMM_Native of NX9.0.1 can not be executed in error. — Content Migration Manager > Knowledge base > I-deas
CMM-Problem: Form- und Lagesymbole Bezugspfeile fehlerhaft — Content Migration Manager > Knowledge base > I-deas
CMM-Umsetzung fehlerhaft bei Symbol-Attributen — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM: Balloon leader is not in the center. — Content Migration Manager > Knowledge base > I-deas
CMM: 752/852 comparison:Drawing Dimensions lose associativity in NX85 — Content Migration Manager > Knowledge base > I-deas
CMM: Catia hidden volumes/bodies are not migrated to NX — Content Migration Manager > Knowledge base > CATIA
CMM: Catia thread with missing labels on drawings — Content Migration Manager > Knowledge base > CATIA
CMM: Chinese text created by "User Note" in I-deas is not migrated to NX — Content Migration Manager > Knowledge base > I-deas
CMM: CMM 9.0.1 doesn't work correct, installation problems — Content Migration Manager > Knowledge base > CATIA
CMM: CMM is not migrating constraints or dimensions in sketches — Content Migration Manager > Knowledge base > I-deas
CMM: CMM902 hangs in Product translation — Content Migration Manager > Knowledge base > CATIA
CMM: Components are not placed in Assembly — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM: Custom Symbol does not retain the position / angle after replacement — Content Migration Manager > Knowledge base > I-deas
CMM: Drawing Missing few curves after Translation — Content Migration Manager > Knowledge base > CATIA
CMM: Example MIG-004 Drawing whit Welding Symbols — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
CMM: Failed to locate migration report in Teamcenter error for migrated Drawings — Content Migration Manager > Knowledge base > I-deas
CMM: GenerateEPF() failed: Error: Cannot locate exchange file — Content Migration Manager > Knowledge base > CATIA
CMM: How to know when to kill the CMM translation process if it hangs — Content Migration Manager > Knowledge base > CATIA
CMM: I-Deas to NX conversion generates NX file with oversized file size — Content Migration Manager > Knowledge base > I-deas
CMM: objects not associative on migrated drawing geometry — Content Migration Manager > Knowledge base > CATIA
CMM: Offset Geometry Associativity in Sketch after Migration. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM: Require threads in Final Brep — Content Migration Manager > Knowledge base > CATIA
CMM: Section view offset (2D) not beeing considered — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMM: Specific Catia parts have quarantine issues in migration — Content Migration Manager > Knowledge base > CATIA
CMM: Symbole has the same value for all after Migration — Content Migration Manager > Knowledge base > I-deas
CMM: symbols attributes and hatch are not propely migrated — Content Migration Manager > Knowledge base > I-deas
CMM: System error during part import 701003: Failed to create NX part — Content Migration Manager > Knowledge base > I-deas
CMM: The crosshatch is changed by CMM Migration from a 2D Layout with Symbols — Content Migration Manager > Knowledge base > I-deas
CMM: Translated drawing having no link with 3D part — Content Migration Manager > Knowledge base > CATIA
CMM: View (4-Ansicht) will not created after Migration from Ideas for NX — Content Migration Manager > Knowledge base > I-deas
CMM: Visible line color in drawing is white after migration from Catia — Content Migration Manager > Knowledge base > CATIA
CMM: wrong arrangement in assembly in use, after CMM migration, in TC Viewer — Content Migration Manager > Knowledge base > I-deas
CMM10.0.1 CatiaV5 fails with error: Failed to generate EPF — Content Migration Manager > Knowledge base > CATIA
CMM1980.4 Catia CMM duplicate Component in BVL — Content Migration Manager > Knowledge base > CATIA
cmmBatch mode delete not supported? — Content Migration Manager > Knowledge base > I-deas
CMMSolo fails convertion of Catiav4 files with special chars ± — Content Migration Manager > Knowledge base > CATIA
CMMSolo fails on the drawing. CMM TC works. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
CMMSolo failure on package file. — Content Migration Manager > Knowledge base > I-deas
CMMSolo V1847: Solidworks assembly can not be loaded in CMM — Content Migration Manager > Knowledge base > SolidWorks
Command line migration tool — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > B. Batch migration
Command line report utility options — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > C. Command line report utility
Configuration Options (CMM options – CATIA V4) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 13. CMM options – CATIA V4
Configuration Options (CMM options – CATIA V5) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 14. CMM options – CATIA V5
Configuration Options (I-deas to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part III: I-deas to NX migration > 9. CMM options – I-deas
Configuration Options (Pro/ENGINEER to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part IV: Pro/ENGINEER to NX migration > 11. CMM options – Pro/ENGINEER
Configuration Options (SolidWorks to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VI: SolidWorks to NX migration > 16. Options – SolidWorks
Configuration Options Templates (CMM options – CATIA V4) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 13. CMM options – CATIA V4
Configuration Options Templates (CMM options – CATIA V5) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 14. CMM options – CATIA V5
Configuration Options Templates (I-deas to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part III: I-deas to NX migration > 9. CMM options – I-deas
Configuration Options Templates (Pro/ENGINEER to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part IV: Pro/ENGINEER to NX migration > 11. CMM options – Pro/ENGINEER
Configuration Options Templates (SolidWorks to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VI: SolidWorks to NX migration > 16. Options – SolidWorks
Configure Teamcenter to allow searching by CMM attributes — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 3. Configuration guide
Configuring Teamcenter — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 3. Configuration guide
Configuring Teamcenter for the migration process (CMM 1921) — Content Migration Manager > Product documentation
Constraints were absent in the assembly after CMM conversion — Content Migration Manager > Knowledge base > SolidWorks
Content Migration Manager 1980 is Now Available — Content Migration Manager > Knowledge base > CATIA
Content Migration Manager 2007 is Now Available — Content Migration Manager > Knowledge base > CATIA
Content Migration Manager Setup Wizard ended prematurely because of an error when attempting to install CMM 2406. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Content migration: part doesn't contain supported geometry — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Controlling the number of items in the Newstuff folder — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 3. Configuration guide
Cosmetic Thread information is missing in drawing/model — Content Migration Manager > Knowledge base > CATIA
Creating user exit customizations (CMM 1921) — Content Migration Manager > Product documentation
Creo Drawing Formats are not getting migrated to NX using CMM — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Creo Drawings with Simplified Representations are not migrating properly — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Creo Flexi component migration issue — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Creo Part fails to migrate having sheet metal features using CMM1921 — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Creo Part file Version is adding to NX part files after migration — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
D. User Exit Customizations — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices
Data management with Teamcenter — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 5. Migration Overview
Datatransfer to CMM MigLab — Content Migration Manager > Knowledge base > SolidWorks
Datum attached to an ordinate dimension causes entire drawing to fail migration — Content Migration Manager > Knowledge base > I-deas
Datum Symbol appears differently in NX after migrated. — Content Migration Manager > Knowledge base > I-deas
Datums are causing drawing migration failures. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Datums are causing the drawing migration to fail. — Content Migration Manager > Knowledge base > I-deas
Deep Copy Rules — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 3. Configuration guide
Differences in section details — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Different behavior in CMM6 and CMM8.5 — Content Migration Manager > Knowledge base > I-deas
Dimension Format is not matching after the Migration of Creo to NX — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Dimension Jogs are not created after the Migration from Creo to NX — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Dimension line width is following the dimension text width. — Content Migration Manager > Knowledge base > I-deas
Dispatcher Client — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 3. Configuration guide
Document Dimensions lose associativity on drawing during CMM. — Content Migration Manager > Knowledge base > I-deas
Download for Content Migration Manager for I-DEAS — Content Migration Manager > Knowledge base > I-deas
Draft Features Flipped in migration — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Draw view is missing by CMM migration when "Suppress Instances" is used. — Content Migration Manager > Knowledge base > I-deas
Drawing Reference Lines missing -> Angular Dimension wrong — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Drawing repair — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Drawing template not fetching the TC Attribute value in Managed NX — Content Migration Manager > Knowledge base > SolidWorks
drawing view not migrated as associative view — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Drawing views are not linked — Content Migration Manager > Knowledge base > CATIA
Drawing will not migrate. CMM processes seem to hang. — Content Migration Manager > Knowledge base > I-deas
Duplicated part files when converting Creo to NX. — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
E. Migrating I-deas CAE data — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices
Edges of 3D model/geometry are missing (hidden) in 2D drawing after CMM migratio — Content Migration Manager > Knowledge base > I-deas
Error 18 - View Content Incomplete — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Error during CMM migration of 2D drawing. — Content Migration Manager > Knowledge base > I-deas
Error during package export in ideas_export — Content Migration Manager > Knowledge base > I-deas
Error in inxInitialize when trying to migrate data using CMM on a machine. — Content Migration Manager > Knowledge base > I-deas
Error while using CMM - Internal error: memory access violation — Content Migration Manager > Knowledge base > I-deas
F. Glossary — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices
Face Blend Creation failed — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Fails to migrate with a error when using CMM Teamcenter — Content Migration Manager > Knowledge base > I-deas
Fallback sketches are created during the Migration of Creo Drawings to NX — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Feature Control frames are not generating after migration — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Feature repair — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
File Names with Chinese characters are not migrating properly using CMM — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
File size 46 times large after converting pro-e nx via cmmsolo — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
File Size is too big after migration from Creo to NX. — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
File Size too big after migration from Creo to NX — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Files Missing in NX Assembly after CMMsolo conversion — Content Migration Manager > Knowledge base > SolidWorks
flipped sketch dimensions after migration with CMM (CADfeature) — Content Migration Manager > Knowledge base > CATIA
Former Ideas migrated Assemblies will not open in NX 11.02 MP6 or later — Content Migration Manager > Knowledge base > I-deas
Hidden objects are visible in the top assembly — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
How to configure the memory usage for CMM — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
I-deas drawing cannot be converted to NX by CMM on Teamcenter. — Content Migration Manager > Knowledge base > I-deas
I-deas drawing cannot be migrated by CMM-solo. — Content Migration Manager > Knowledge base > I-deas
I-deas part with offset curve off sketch plane does not migrate — Content Migration Manager > Knowledge base > I-deas
Ideas Feature Control Symbols are migrated as a Note in NX via CMM — Content Migration Manager > Knowledge base > I-deas
Ideas symbol is not migrated to NX as expected by CMM — Content Migration Manager > Knowledge base > I-deas
Import of I-deas '.asc' drawing in to NX fails to complete... — Content Migration Manager > Knowledge base > I-deas
Improve option mapping for Creo chamfer migration - BT29344 — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
In Drafting files the component parts relation is maintained as reference after — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Include Suppressed Instances - Different assembly-structures, depending on th — Content Migration Manager > Knowledge base > SolidWorks
Installation — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 3. Configuration guide
Instance suppression in views causing views to be skipped in migration. — Content Migration Manager > Knowledge base > I-deas
Introduction to user exit customization — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > D. User Exit Customizations
Invalid dataset type error when attempting to use scan mode of cmmbatch. — Content Migration Manager > Knowledge base > CATIA
Invalid Layer Category Name in CMM migrated Drawing — Content Migration Manager > Knowledge base > I-deas
Is it possible to open an I-DEAS .xpk file in NX? — Content Migration Manager > Knowledge base > I-deas
Issue with the Migration of Creo parts (future mode) — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Issues with Extrudes defined by two directions — Content Migration Manager > Knowledge base > SolidWorks
Issues with the arrows out dimensions migrated from I-deas. — Content Migration Manager > Knowledge base > I-deas
It is unable to migrate the suppressed feature from I-deas to NX — Content Migration Manager > Knowledge base > I-deas
Item balloons not migrated correctly via CMM 7.5.2 — Content Migration Manager > Knowledge base > I-deas
Label text with leader on migrated drawing are written at 15 degree angle — Content Migration Manager > Knowledge base > I-deas
Lockheed Martin "Speed Racer" catia dataset — Content Migration Manager > Knowledge base > CATIA
Lost associativity of Datum Feature when migrate drawing using CMM — Content Migration Manager > Knowledge base > I-deas
LOV: CMM DataType — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > LOV
LOV: CMM ReportStatus — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > LOV
LOV: CMM ReviewStatus — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > LOV
Major issue for Converted data - file size — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Manual history — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020)
Merge Feature is not supported from Creo to NX migration — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Migation 2d drafting form Ideas 6.6 to NX12 with cmm12. — Content Migration Manager > Knowledge base > I-deas
Migrate data using the command line — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > B. Batch migration
Migrate the FE model — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > E. Migrating I-deas CAE data
Migrated Assemblies having assembly constraints related issues. — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Migrating I-deas CAE data — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > E. Migrating I-deas CAE data
Migrating released items — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Migration error in Drawing after conversion using CMM — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Migration error report — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > C. Command line report utility
Migration feature report — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > C. Command line report utility
Migration from I-Deas to NX of drawing creates 2 drawings — Content Migration Manager > Knowledge base > I-deas
Migration Menu — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 5. Migration Overview
Migration of certain NX I-deas Drawings via CMM to NX crashes Tc server process — Content Migration Manager > Knowledge base > I-deas
Migration process (CATIA to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 12. Migrating CATIA data
Migration process (General migration process) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Migration process (I-deas to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part III: I-deas to NX migration > 8. Migrating I-deas data
Migration process (Pro/ENGINEER to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part IV: Pro/ENGINEER to NX migration > 10. Migrating Pro/ENGINEER data
Migration process (SolidWorks to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VI: SolidWorks to NX migration > 15. Migrating SolidWorks data
Migration Tools Overview — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 4. Migration Tools
Mirror Merge feature is not migrating properly as per Creo — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Missing geometric tolerances on NX drawing after migration from ProE — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Missing menu CMM after installation CMM_V2312_Windows64 — Content Migration Manager > Knowledge base > I-deas
Missing UGOpen Funtion — Content Migration Manager > Knowledge base > I-deas
Model converted with issues during CMM — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Model templates — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 2. Release notes
MultiCAD configuration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 3. Configuration guide
MultiCAD processes — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Multiple symbols are replaced by the first symbol in which CMM-solo convert — Content Migration Manager > Knowledge base > I-deas
NC: CMM hangs when apptempt to migrate a drawing. — Content Migration Manager > Knowledge base > I-deas
need NXOpen methods to detect and delete CMM I-Deas Migration Data — Content Migration Manager > Knowledge base > I-deas
NULL/EmptyString Item ID through DataManagementService.getNextIds(InfoForNext[]) — Content Migration Manager > Knowledge base > CATIA
NX Assemblies with Multi-CAD structure can't be loaded randomly — Content Migration Manager > Knowledge base > I-deas
NX Assembly position overrides after CMM translation — Content Migration Manager > Knowledge base > SolidWorks
NX converted from CMM I-DEAS conversion contains no geometry — Content Migration Manager > Knowledge base > I-deas
NX I-deas 6.7 is available for download — Content Migration Manager > Knowledge base > I-deas
NXOpen.MigrationManager has no public classes — Content Migration Manager > Automation surface
Open/Search times in NX from TcUA not linear across assembly size — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Operation input: CMM2SessionCreI — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Operation input
Operation input: CMM2SessionFormCreI — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Operation input
Operation input: CMM2SessionFormSvAI — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Operation input
Operation input: CMM2SessionSvAI — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Operation input
Operation input: CMMAttributesCreI — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Operation input
Operation input: CMMAttributesFormCreI — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Operation input
Operation input: CMMAttributesFormSvAI — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Operation input
Operation input: CMMAttributesSvAI — Content Migration Manager > Teamcenter data model (Teamcenter 14.3, cmm template) > Operation input
Other command line options — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > B. Batch migration
Overlay issue for Creo drawings after CMM Migration — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Papersize and scale changed when the drawing was migrated to NX. — Content Migration Manager > Knowledge base > I-deas
Part I: New features, Release notes, and Configuration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020)
Part II: General migration process — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020)
Part III: I-deas to NX migration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020)
Part IV: Pro/ENGINEER to NX migration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020)
Part List Balloons are attached to other views after migration of Creo Drawings — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Part V: CATIA to NX migration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020)
Part VI: SolidWorks to NX migration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020)
Part VII: Appendices — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020)
Part with existing material can't be associated to existing Material Library — Content Migration Manager > Knowledge base > I-deas
Perform pre-migration scans — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > B. Batch migration
Performing CMM conversion with feature gives no feature translated — Content Migration Manager > Knowledge base > CATIA
Perpendicular dimensions are retained in NX when migrated from Ideas - CMM 8.5.2 — Content Migration Manager > Knowledge base > I-deas
Phased migration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Please tell me "The export operation is not supported in a multi-tier configurat — Content Migration Manager > Knowledge base > I-deas
PMI repair — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
PR CMM Creo 32 "Skeleton new" — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
PR CMM Creo 33 "Joints are not migrated with Datums" — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
PR id2NX mig\\"set angle" option from Ideas dim converted to non associative dim — Content Migration Manager > Knowledge base > I-deas
PR Ideas2NX mig\\ Translation issue for custom symbols. — Content Migration Manager > Knowledge base > I-deas
PR\\ Cylindrical dimensions have lost their associativity during the Migration.. — Content Migration Manager > Knowledge base > I-deas
Pre-migration (CATIA to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 12. Migrating CATIA data
Pre-migration (I-deas to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part III: I-deas to NX migration > 8. Migrating I-deas data
Pre-migration (Pro/ENGINEER to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part IV: Pro/ENGINEER to NX migration > 10. Migrating Pro/ENGINEER data
Pre-migration (SolidWorks to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VI: SolidWorks to NX migration > 15. Migrating SolidWorks data
Pre-migration audit — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > C. Command line report utility
Pre-Migration Audit — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Pre-Migration Scan Menu doesn't appear on TC8.3+CMM7.5 — Content Migration Manager > Knowledge base > CATIA
Pre-text and post-text dimensions are very large after migration. — Content Migration Manager > Knowledge base > I-deas
Preface — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020)
Pro/ENGINEER new features — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 1. New features
Problem about drafting datum symbol by CMM migration. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Problem of View Label in I-deas data with CMM. — Content Migration Manager > Knowledge base > I-deas
Processing post upgrade of feature Content Migration Manager failed. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
ProE Pattern features migrate incorrectly, not called out in Migration Report — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Rectangular patterns lose the X and Y directions when migrated thru CMM. — Content Migration Manager > Knowledge base > I-deas
Remigration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Renaming Sheet cause NX to crash — Content Migration Manager > Knowledge base > CATIA
Section view cannot be updated for CMM migrated drawing. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
section views are not migrated as per creo. — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Services — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 13. CMM options – CATIA V4
Setup to migrate FE models — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > E. Migrating I-deas CAE data
Sketch curves in parts migrated from Catia V5 to NX have a width of 0.13mm — Content Migration Manager > Knowledge base > CATIA
Sketch patterns are not migrating properly — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Software Copyright and Trademark Notices — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Preface
Software versions and supported platforms — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 3. Configuration guide
SolidWorks Configuration are not getting Migrated to NX using CMM (Content Migration Manager) — Content Migration Manager > Knowledge base > SolidWorks
Solidworks drawing migration issue - table migrated to fallback sketches — Content Migration Manager > Knowledge base > SolidWorks
SolidWorks new features — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 1. New features
Some dimensions are wrong when migrate ProE drawing and need to be CMM Report — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Some hidden lines are translated to visible lines. — Content Migration Manager > Knowledge base > I-deas
Submitting Comments — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Preface
Surface Finish Symbols are not migrated correctly via CMM 8.5.1 — Content Migration Manager > Knowledge base > I-deas
Surface finish symbols do not migrate correctly — Content Migration Manager > Knowledge base > I-deas
Surface finish symbols do not migrate correctly — Content Migration Manager > Knowledge base > I-deas
Surface finish symbols do not migrate correctly from Ideas to NX — Content Migration Manager > Knowledge base > I-deas
Surface Finish Symbols do not migrate correctly from Ideas to NX via CMM — Content Migration Manager > Knowledge base > I-deas
Symbols all get the same value after migration — Content Migration Manager > Knowledge base > I-deas
Symbols are changing when using CMM tool. — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
System Environment Variables for Option Values (CMM options – CATIA V4) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 13. CMM options – CATIA V4
System Environment Variables for Option Values (CMM options – CATIA V5) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 14. CMM options – CATIA V5
System Environment Variables for Option Values (I-deas to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part III: I-deas to NX migration > 9. CMM options – I-deas
System Environment Variables for Option Values (Pro/ENGINEER to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part IV: Pro/ENGINEER to NX migration > 11. CMM options – Pro/ENGINEER
System Environment Variables for Option Values (SolidWorks to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VI: SolidWorks to NX migration > 16. Options – SolidWorks
System-wide CMM Options File (CMM options – CATIA V4) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 13. CMM options – CATIA V4
System-wide CMM Options File (CMM options – CATIA V5) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 14. CMM options – CATIA V5
System-wide CMM Options File (I-deas to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part III: I-deas to NX migration > 9. CMM options – I-deas
System-wide CMM Options File (Pro/ENGINEER to NX migration) — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part IV: Pro/ENGINEER to NX migration > 11. CMM options – Pro/ENGINEER
System-wide migration options File — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VI: SolidWorks to NX migration > 16. Options – SolidWorks
TDM Import/Export no longer supported in TcII 14.2 — Content Migration Manager > Knowledge base > I-deas
Teamcenter 11.2 base install not selecting legacy template with TCII dependencies — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Teamcenter errors when migrating large assemblies — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 2. Release notes
Teamcenter Integration for I-deas (TcII) 14.2 released for Teamcenter 14.2 — Content Migration Manager > Knowledge base > I-deas
Teamcenter workflow on CMM migrated data crashes 4-tier RAC — Content Migration Manager > Knowledge base > I-deas
Template files — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Testing migration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Text from Surface Finish Symbol not created — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
The centroid of 3D data is set at the unexpected position. — Content Migration Manager > Knowledge base > I-deas
Too long migration time for ProE assembly dataset (98 hours) — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Too many reference point display - BT31521 — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
top level configurations ONE/ALL results in different naming and referencing — Content Migration Manager > Knowledge base > General (install, licensing, Teamcenter, batch)
Trim Surface direction flips after the migration — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Troubleshooting — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Unclean lines of dimension details e.g. Gaps in dimension extension lines — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Units issue with CMM migration from Creo to NX — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Unwanted ST symbols are created during the drafting files migration from Creo to — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Update CMM Attributes — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > C. Command line report utility
Update Teamcenter schema — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part I: New features, Release notes, and Configuration > 3. Configuration guide
Usability — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part V: CATIA to NX migration > 13. CMM options – CATIA V4
User exit customization points — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part VII: Appendices > D. User Exit Customizations
Using CMM to migrate IDEAS data to NX crashes Teamcenter — Content Migration Manager > Knowledge base > I-deas
Views are failing after the Migration from Creo to NX — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
Views migrating as 2D when instance suppression is on the view — Content Migration Manager > Knowledge base > I-deas
Views with spaces after the view name will not migrate to NX. — Content Migration Manager > Knowledge base > I-deas
Wave-Links Issue SolidWorks — Content Migration Manager > Knowledge base > SolidWorks
Weld symbols are out of position when migrated to NX via CMM 7.0 — Content Migration Manager > Knowledge base > I-deas
Welding indication notes is not shown correctly after the Migration — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
What to migrate — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
When the Save As -> New Item, an error occurred of invalid tag — Content Migration Manager > Knowledge base > I-deas
When to migrate — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Who should do the migration — Content Migration Manager > User's Guide (CMM 1899 Series, Jan 2020) > Part II: General migration process > 7. Best practices
Wrong dimension after CMM migration — Content Migration Manager > Knowledge base > I-deas
Wrong view boundaries — Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo
zeros are displayed in the Surface Finish Symbol's after migrating with cmm — Content Migration Manager > Knowledge base > I-deas
zeros are displayed in the Surface Finish Symbol's after migrating with cmm — Content Migration Manager > Knowledge base > I-deas