Create a datum plane using offset

This example shows how to create a datum plane that is offset from an inferred plane using two lines.

1. Choose Home tab → Construction group → Datum Plane.
2. From the Plane Type list, select Inferred.
3. Select the first linear edge to define the plane.
4. Select the second linear edge to define the plane.
5. In the Offset group, select the Offset check box. Verify the direction of the desired offset.
6. Drag the direction arrow the desired value of the offset, or enter it in the offset Distance box.
7. Choose another command or click Apply.

Related

• Create a datum plane using Infer
• Create a datum plane using a point and a direction
• Create a datum plane at an angle
• Create a datum plane midway between planar faces
• Create a datum plane through three points
• Create a datum plane using coefficients
• Size and resize datum planes
• Datum Plane dialog box

---

Create a datum plane using offset, NX 2212 Series © 2023 Siemens