CMM conversion in feature mode will produce only brep in NX

CMM conversion in feature mode will produce only brep in NX Software Versions/Configuration:

========================================

TC 10.1.2.1

NX 9.02

CMM 9.02

Catiav5 Integration release 21

Description of Problem:

========================

Performing CMM translation of component FA00AAW07914 from Catiav5 to NX with feature mode set will produce only a brep without feature inside.

Steps to Duplicate:

======================

Run CMM conversion of given CatPart with Feature mode migration setting.

Duplicated in GTAC Office in OOTB Environment: (Y/N with an explanation if No)

============================================================

No.

Problem has been reproduced by Professional Services colleague. This is a blind PR.

Additional data provided: (Y/N)

========================================

Y.

Uploaded 7376227_data file to PR Data Tool (EMEA Server - Export)

Additional Info:

========================================

The case is similar to the one reported in PR 7376189. So it looks like it fails with the feature migration and then works with the fail-safe Brep migration mode.

Not clear if the cause of these two situations is the same. Siemens PLM believes that the problem you reported where CMM conversion in feature mode will produce only BREP in NX has been resolved by code changes made to the release of our product CMM (Content Migration Manager) version 10.0.2.

PR 7376227 Product Information: Product: NX , Application: CMM , Version: V9.0.2