CMM Creo - Pattern Feature unsupportet for Assembly Cut

CMM Creo - Pattern Feature unsupportet for Assembly Cut 1 Symtom / Problem DescriptionPattern features are unsupported within Assembly Cut (assembly-part).

All feature (holes and threads) in the following examples are migrated as a single features.

We always use Feature Translation Mode = BrepMode, however, in "FeatureMode" we get the same result.

1.1 Migration Environment:Environment Setup 1:

CMM Solo 12.0.2.093

NX 12.0.2.9

Creo Parametric 4.0 - M080

Windows7

Environment Setup 1:

CMM Solo 1847.192

NX 1859

Creo Parametric 4.0 - M080

Windows10

1.2 ExpectationsSingle features are migrated as Assembly Cut, we expect the same for the feature pattern.

Then the bolt (b_31_din912) in the assembly can also be migrated with a "pattern component".

CMM Continous Release should be enhanced with support for Assembly Cut as pattern

1.3 Detail InformationExample ˆsimple" / Path: ‰\example_simpleNX1847_Series...

Creo Data

Assembly Cut (assembly-part) = b_31_ubg1.asm.5

Part "Promote Body" = b_31_bg-t.prt.3

Pattern Feature Type = Dimension

1.4 Supporting DataFor more detailed information see PDF document within IR-Data Zipfile

.zip

FolderDescriptionTranslation Mode

example\Creo Creo 4 files

example\NX12_brep CMM Scratch from CMM/NX 12 migration Brep Mode

example\NX12_feature CMM Scratch from CMM/NX 12 migration Feature Mode

example\NX1847_Series CMM Scratch from CMM/NX 1847 Series migration Brep Mode

FolderDescriptionTranslation Mode

example_simple\Creo Creo 4 files

example_simple\NX12 CMM Scratch from CMM/NX 12 migration Brep Mode

example_simple\NX1847_Series CMM Scratch from CMM/NX 1847 Series migration Brep Mode The problem "CMM Creo - Pattern Feature unsupportet for Assembly Cut"has been investigated and the following has been found.

Support for the desired pattern features will be considered for a future release of CMM. PR 9478090 Product Information: Product: NX , Application: CMM , Version: V1859