Performing CMM conversion with feature gives no feature translated

Performing CMM conversion with feature gives no feature translated Software Versions/Configuration:

========================================

Teamcenter 10.1.2.1

NX 9.03

CMM9.02

Catiav5Integration Release 21

Description of Problem:

========================================

Performing conversion of component FA00AAW05986 with Feature Mode set as translation mode produces only a Brep representation without features.

Steps to Duplicate:

========================================

Run conversion of CMM with the CATPart uploaded

Duplicated in GTAC Office in OOTB Environment: (Y/N with an explanation if No)

============================================================

No.

Problem has been reproduced by Professional Services colleague. This is a blind PR.

Additional data provided: (Y/N)

========================================

Y.

Uploaded 7376189_data.zip file to PR Data Tool (EMEA Server - Export)

Additional Info:

========================================

From the provided cmmOptions.xml file the option "Feature" is set as value="BrepMode"/>. Here is the point because the user is claiming that the option used while translated is the Feature mode. The problem is that the component immediately goes in error with this option and the system switches in recovery mode which is the Brep translation.

the cmm.log file shows this error

** 2015-04-29 10:25:51.603 generateEPF() failed:

*** 2015-04-29 10:25:51.618 Error: Cannot locate exchange file

*** 2015-04-29 10:25:51.618 Cannot locate exchange file Siemens PLM believes that the problem you reported where "Performing CMM conversion with feature gives no feature translated" will be resolved by code changes made to the release of our product CMM (Content Migration Manager) version 10.0.2.

PR 7376189 Product Information: Product: NX , Application: CMM , Version: V9.0.3