CMM: Catia hidden volumes/bodies are not migrated to NX

CMM: Catia hidden volumes/bodies are not migrated to NX SYMPTOM/PROBLEM

Environment setup:

Teamcenter 10.1.6 (64bit)

TCIC 10.0.4

NX 10.0.3.5 

CATIA V5 R21

CMM 10.0.3.1.028

Issue description

In a Catia part it is possible to hide entire volume bodies. Same functionality is available in NX. During migration hidden Catia volumes are ignored and will not show up in NX.

In the example below there are two volumes hidden.

 

Figure 1: Catia part with hidden volumes

 

Figure 2: Catia part with shown volumes

In NX the two hidden volumes are not available.

 

Figure 3: NX part without hidden volumes

CMM Migration Status does not indicate that some information from Catia is lost. User does loose information without knowing about. 

 

EXPECTATIONS:

CMM should migrate Catia hidden volumes to NX and hide them. Since this functionality is similar in Catia and NX this should be provided in a similar way.

ANALYSES

NA

HOW TO REPRODUCE THE PROBELM:

Download the provided data file from GTAC (File: .zip)

— Migrate provided Catia data to NX using default CMM options

SUPPORTING DATA: .zip

—	PDF document with description and screenshots

—	Catia data (three examples)

o	700-07390-P2.CATPart

o	700-16105-P123.CATPart

o	700-16105-P131.CATPart

—	Migrated NX data

—	CMM Scratch folder

WORKAROUND: 

None

PLATFORM:

Tested on Windows

PLATFORM SPECIFIC:

N/A

VERSION SPECIFIC:

N/A

ADDITIONAL INFORMATION:

Siemens PLM believes that the problem you reported where CMM: Catia hiddenvolumes/bodies are not migrated to NX will be resolved by code changes madeto the release of our product CMM 11.0.1.

Solved by setting CMM option "Translate NoShow (Brep) = All". PR 7847252 Product Information: Product: NX , Application: CMM , Version: V10.0.3