Missing geometric tolerances on NX drawing after migration from ProE

Missing geometric tolerances on NX drawing after migration from ProE Software Versions/Configuration:

===============================

OS: Win7-64SP1

TC: n/a

CMM: CMM7.5.5.149

NX: NX7.5.5.4

Pro/ENGINEER Wildfire 4

Description of Problem:

======================

Business Usecase:

---

Content migration management is used to migrate data from legacy systems to target format. In this case it is from ProEngineer to NX. Designers need this legacy data to be able to support existing products and to be able to reuse design knowledge captured in legacy data. Migration should be as error less as possible.

Description:

---

Specific geometric tolerances presented on top level assembly drawing in ProEngineer are not present on the NX drawing after migration. These geometric tolerances are attached to dimensions. The most important detail here is, that this error is not stated in Report, so user will not be able to identify missing tolerances, unless he/she checks the drawing manually

Steps to Duplicate:

==================

Use CMM7.5.5. and migrate drawing "TEST113" to NX

compare NX TEST113 drawing vs PROE TEST113 drawing.

Notify that the Feature Control Frame (Geometry Tolaerance):

---

|Cylindrical|0,018|

---

is missing in the NX Drawing!

For further Details please check Word Doc in file :

1929702_IR_Problem_Report_PL00025411_Missing_geometric_tolerances.zip

Duplicated in GTAC Office in OOTB Environment: Y

=============================================

This has been reproduced in EUROTAC office with TC OOTB on Windows.

Additional data provided: Y/N

========================

A file has been uploaded to PR Data Tool (EMEA Server - Export) for this PR.

---

Uploading : 1929702_IR_Problem_Report_PL00025411_Missing_geometric_tolerances.zip

(118.660 bytes)

Upload started ...Upload completed

---

Uploading : IR_1929702_Missing_geometric_tolerances.zip

(438.195.986 bytes)

Upload started ...Upload completed

---

Additional Info:

===============

Any other info that may be needed for this PR that is not Needed for Others

Siemens PLM believes that the problem you reported "Missing geometrictolerances on NX drawing after migration from ProE" will be resolved by code changes made to the release of our product CMM11.0.2. PR 1929702 Product Information: Product: NX , Application: TRANSLATOR , Version: V7.5.5