CMM Creo - CMM Creo - enhance to have Pro/Engineer-Creo Joints migrated to NX

CMM Creo - CMM Creo - enhance to have Pro/Engineer-Creo Joints migrated to NX Symptom / Problem DescriptionThe constraints of type "Connection" (Creo) are not migrated to constraints of type "Joints" (NX).

Remark:

We always use Feature Translation Mode = BrepMode, however, in "FeatureMode" we get the same result.

For Assemblies Translation Mode we plan to use Feature Mode, however for CMM validation sometimes also Brep Mode is tested

3.1 Environment setup:Environment Setup 1:

CMM Solo 1847.192

NX 1859

Creo Parametric 4.0 - M080

Windows10

3.2 ExpectationsMigration of constraints of type "Connection" (Creo) to constraints of type "Joints" NX, "Slider" to "Slider" and "Pin" to "Hinge".

3.3 Detail InformationExample ˆzwangsbedingung_grenzen_trans.asm"

Creo: Constraint Connection Type "Slider" with limit's (min./max.)

NX: The constraint connection type "Slider" with limit's will not be migrated to NX.

For more examples see provided document in PR data

3.4 Supporting DataFor more detailed information see PDF document within IR-Data Zipfile

.zip

FolderDescriptionTranslation Mode

...\Creo Creo 4 data files

...\NX1847_Series cmmScratch from CMM NX 1847 Series migration Brep Mode

PlattformWindows10

Platform Specificno

Version Specificno

The problem "CMM Creo - Joints are not migrated" has been investigatedand the following has been found.

This is an enhancement request. Closing this PR and convert it to an ER. PR 9494175 Product Information: Product: NX , Application: CMM , Version: V1859