Content Migration Manager > Knowledge base > Pro/ENGINEER and Creo

CMM Creo 4 Assembly constraint axis to axis missing

CMM Creo 4 Assembly constraint axis to axis missing CALL INFORMATION


This call needs to be transferred to GTAC US and marked as PR so that the customer data can be made available to the Milford migration lab people working with CMM Creo tools. 

Please close this call as PR and upload the supplied data to the PR data tool.

SYMPTOM/PROBLEM

Environment setup:

CMM 11.0.2.1 / 12.0.1

NX 11.0.2.7 / NX 12.0.2.9

Creo Parametric 4.0 M030

We are testing CMM Creo Parametric at the customer.

Issue is that Creo assembly constraint type "coincident" is not migrated to NX . The following shows examples where the coincident constraint is defined between two datum-axis.

EXPECTIATIONS:


Assembly constraints needs to be migrated to NX. 

The issue should to be fixed in NX / CMM 11 release since update to higher NX version does require that Teamcenter is first updated to at least 11.x

NX 12 is no target release. Next target will be NX continuous sometime in second half of 2019.

DETAIL INFORMATION:

Assembly 1: beispiel_achsen.3.prt in Folder beispiel_achsen"

Error with component 1 (see number on picture)

The assembly constraint of Creo "coincident" from datum-axis to datum-axis is not migrated to NX.In Creo the part beispiel_achsen_2" is linked to the datum-axis (A_Y) to part "beispiel_achsen.asm" to the datum- axis (BA_Y).

In NX we expect the assembly constraint of the type "align" from datum-axis (A_Y) to datum- axis (BA_Y).

Error with component 2 (see number on picture)

The assembly constraint of Creo "coincident" from datum-axis to the construction element axis is not migrated to NX.

In Creo, part beispiel_achsen_2" (datum-axis (A_Y)) is linked to part beispiel_achsen_1" (construction element axis (A_2)).

In NX we expect the assembly constraint of the type "align" from datum-axis (A_Y) to datum- axis (A_2).

Assembly 2: 184150 in Folder 184150"

The assembly constraint "align" in Creo from Part "116299(DINEN24032)" of the construction element axis (A_1) from Hole(ID60) to datum-axis (YY) in assembly "184150" is not migrated to NX.

SUPPORTING DATA: .zip


	\Creo                    Creo data

	\NX11                    Migrated NX 11 data

	\NX11\CMMScratch         CMM 11 migration logs

	\NX12	                  Migrated NX 12 data

	\NX12\CMMScratch	  CMM 12 migration logs



PLATFORM:

~~~~~~~~~~

Windows

PLATFORM SPECIFIC:

N/A

VERSION SPECIFIC:


no

Siemens PLM believes that the problem you reported "CMM Creo 4 Assembly constraint axis to axis missing" will be resolved by code changes made to the release of our product CMM 12.0.2.

Both issues with the constraint have been resolved in CMM 1872.
PR 9236238
 Product Information:
  Product: NX , Application: CMM , Version: V11.0.2

Source: https://support.sw.siemens.com/en-US/knowledge-base/PL8110764 · retrieved 2026-10-02