Document Dimensions lose associativity on drawing during CMM.

Document Dimensions lose associativity on drawing during CMM. Description of problem:

When converting I-deas NX models and drawings through CMM integrated to NX 11, the document dimensions in I-deas lose associativity. The dimensions are going to "Hot Points" that are not migrated. The Document Dimensions are sketch dimensions that can be viewed on the drawing. They act similar to PMI dimensions in NX. We would like a patch, or way of highlighting the unassociated dimensions prior to migrating our entire TDM.

How to reproduce the problem:

1. Import and migrate the attached data

2. Note how the report does not show a problem and how the dimensions don't appear retained in NX but are not associative if the model is changed.

Workaround:

None

Platform(s) and version(s) tested on:

TC11, CMM11, I-deas 6.5

Data or platform specific:

This is not data specific. Any view using the Key/Driving dimensions toggle will have the same issue with those dimensions when migrated.

File type:

package file

File location: See coordinator notepad

Other information:

none

Siemens Digital Industries Software believes that the problem you reported where the drawing dimensions lose associativity during drawing migration will be resolved by code changes made to the release of our product NX version 1847. PR 9002298 Product Information: Product: NX , Application: CMM , Version: V11.0.2