I-deas drawing cannot be converted to NX by CMM on Teamcenter.

I-deas drawing cannot be converted to NX by CMM on Teamcenter.

PR Number: 9516588

Priority: 2

GTAC Urgency: No

PR Matrix: 6b.

============================

Problem Description:

I-deas drawing cannot be converted to NX by CMM on Teamcenter.

=============================================================================

NX Versions: NX1847

CMM Versions: CMM1847

Managed Mode: Yes

Tc Versions: TC11.6.0.1

Containing:

---

Part: n/a

AVI: n/a

Syslog: Yes

Other Files: Yes

Work Around: n/a

Steps to Duplicate:

---

1)Install Teamcenter 11.6.0.1 + CMM1847 + NX1847 + TcII11.2 + NX I-deas 6.7.

2)Start Teamcenter 11.6.0.1 and login.

3)Start I-deas and create new part and related drawing.

4)Check-in part and drawing to Teamcenter.

5)Select I-deas Item.

6)Select [CMM]-[Migrate to NX].

Then, CMM conversion of drawing fails.

---

Additional Note:

• Fail

CMM-ENG 3D and 3D related drawing (The drawing has a relation to 3D model).

• Succeed

CMM-ENG 3D and standalone drawing (The drawing doesn't have a relation to 3D model).

CMM-solo 3D and 3D related drawing (The drawing has a relation to 3D model).

CMM-solo 3D and standalone drawing (The drawing doesn't have a relation to 3D model).

N/A:

Problem is part specific: Unknown

Problem is OS specific: Unknown

Platform Information-

---

Problem is platform specific: Unknown Platform:

Problem verified on the following platforms and OS versions:

NX Versions Tested In GTAC: NX1847

OS Versions used during Test: Intel Win 7 64Bit

Siemens PLM believes that the problem you reported where I-deas drawing cannot be converted to NX by CMM on Teamcenter will be resolved by code changes made to the release of our product CMM version CMM release 12.0.2 MPx and CMM release 1847.

PR 9516588 Product Information: Product: NX , Application: CMM , Version: V1847