CMM: 752/852 comparison:Drawing Dimensions lose associativity in NX85

CMM: 752/852 comparison:Drawing Dimensions lose associativity in NX85 IR Number:     1986169

         Priority:     1

 Business Urgency:     No

     GTAC Urgency:     No

      PR Matrix:     

============================

Problem Description:

Dimensions from migrated drawings are not associative anymore when migrated with CMM 852. Migrating the same drawing with CMM 752 has asociative dimensions.

=============================================================================

NX Versions:     NX 8.5.2

Managed Mode:     Yes and No

Tc Versions:     

Containing:

---

Part:          YES

AVI:          n/a

Syslog:          YES

Other Files:     YES

Work Around:     n/a

Steps to Duplicate:

Description from the customer:

#########

Valued colleagues,

we´ve migrated one and the same I-deas NX structure with CMM755/NX7554 and CMM852/NX8523 and compared  the results.

All Dimensions in a Drawing in  NX85 are not associative any more.

Some of them show up just in that specific ?dashed? style.

Others appear ?normal? (=associative) but ?Edit Associativity? can´t be used on them.

As soon as the topology to which these are associated to was modified, they immediately appear even ?dashed??

In NX75 all Dimensions appear associative and behave correct/as required and expected.

I have compared the CMM Options to be defined the same for both CMM versions and that we´ve used the same Seedparts.

I will upload the following data which can be extracted from a ZIP-Archive via FTP:

NX I-deas Packagefiledata:

...\cmm-mf6421a2

CMM755 Configdata ("SSI" Template used for migration)

...\NX75\Config

CMM 755 Reportdata

...\NX75\report

CMM 755 Logiles and resulting NX Partfiles

...\NX75\scratch

CMM852 Configdata ("SSI" Template used for migration)

...\NX85\Config

CMM 852 Reportdata

...\NX85\report

CMM 852 Logiles and resulting NX Partfiles

...\NX85\scratch

NX 75 Seedparts, used for migration

...\SSI_NXseed\NX75

NX 85 Seedparts, used for migration

...\SSI_NXseed\NX85

The Drawing is question is the NX Partfile "09-006-012-010-0001-2.1.prt", which is associated to Mastermodel "46-006-012-010-0001-0.1.prt".

All Dimensions in the Views of the Drawing in NX85 are non-associative (while they are associative in NX75).

Please be so kind to try to examine this and hopefully find the cause for this strange and cumbersome result we´ve achieved...

##########

The issue appears if the migration is performed in managed mode or with CMM Solo ans is independent from the NX seed part.

Problem is part specific:     Unknown

Problem is OS specific:          Unknown

Platform Information-

Problem is platform specific:     Unknown  

Platform: Intel    

Problem verified on the following platforms and OS versions:

Intel IV, Win7 64-bit This issue is currently open and under investigation. When the investigation completes, this article will be updated to include all of the pertinent information and conclusions. If you have further questions related to this article, or any article, please contact Support for assistance. PR 1986169 Product Information: Product: NX , Application: TRANSLATOR , Version: V8.5.2