PR CMM Creo 33 "Joints are not migrated with Datums"

PR CMM Creo 33 "Joints are not migrated with Datums" Problem Description

This new PR is very similar to the PR 9494175, this was implemented by Siemens and was closed by us.

The joints are not migrated when the geometry is constrained with datum (Datum Plane, Datum Axis,

Datum CSYS).

Environment Setup:

CMM Solo 1953.192

NX 1953 (Build 1700)

Creo Parametric 4.0 - M080

Windows10

Expectations:

We expect that the joints will also be migrated to NX if these are defined with datums.

The limits must also be migrated correctly to NX.

Details:

Migration of constraints of type "Connection" (Creo) to constraints of type "Joints" NX, "Slider" to "Slider"

Migration of constraints of type "Connection" (Creo) to constraints of type "Joints" NX, "Pin" to "Hinge".

Constraint Connection Type "Cylinder" with Limit's (min./max., Translation and Rotation)

Expectation: Migration to joint of type "Cylindrical" with Limit's (min./max.Translation and Rotation)

Steps to Reproduce:

Please see PDF uploaded for details and how to reproduce

Supporting Data

For more detailed information see PDF document

Folder - Description - Translation Mode

...\Creo - Creo/4 files

...\NX1953 - CMM Scratch from CMM/NX 1953 migration - Brep Mode This issue is currently open and under investigation. When the investigation completes, this article will be updated to include all of the pertinent information and conclusions. If you have further questions related to this article, or any article, please contact Support for assistance. PR 10047865 Product Information: Product: NX , Application: ASSEMBLIES , Version: V1953