CMM Pro/E assembly issue with position override

CMM Pro/E assembly issue with position override IR Number: 1988311

       Priority:	1

Business Urgency: No

   GTAC Urgency:	No

      PR Matrix:	Wrong Result

Problem Description:

=============================================================================

CMM Pro/E assembly issue with position override

Multi-level assemblies that are migrated from Pro/E always have at least one sub assembly component that uses an explicit override for the positioning. Due to this override all constraints from the sub assembly are visible in the constraints section of the top assembly.

=============================================================================

Versions:

=============================================================================

Managed Mode: No

NX: 8.5.3

CMM: 8.5.2.1

IR1988311.zip Containing:

=============================================================================

IR1988311 CMM ProE assembly issue with position override.docx

nx data in folder ..\nx_mig

proe data in folder ..\proe

Steps to Duplicate:

=============================================================================

o Migrate a multi-level Pro/E assembly (or the one provided with the IR) that uses assembly constraints to position the sub assembly to the top assembly

o Review all position definitions in the sub assembly

o Review the number of constraints in the top assembly and the sub assembly

o Remove the position override from the sub assembly component and see that the number of constraints in the top assembly is reduced by the number of constraints from sub assembly

See "IR1988311 CMM ProE assembly issue with position override.docx" for steps to duplicate and for clarification.

Work Around:

=============================================================================

Unknown

Problem is part specific: Unknown

Platform Information:

=============================================================================

Problem is OS specific: No

Problem is platform specific: No

Platform: Intel Win764-bit

Problem verified on the following platforms and OS versions:

Intel Win764-bit, NX8.5.3.3 CMM 8.5.2.1

Additional Notes:

================================

Migration Report does not give any errors, however please check if those position override constrains can be avoided during migration.

Siemens PLM believes that the problem you reported "CMM Pro/E assemblyissue with position override" will be resolved by code changes made to the release of our product in CMM11.0.2. PR 1988311 Product Information: Product: NX , Application: CMM , Version: V8.5.3