Arrows for the section view not created

Arrows for the section view not created IR Number : 8314630

Priority : 2

Business Urgency : No

GTAC Urgency : No

PR Matrix : Wrong Result

==============================================================================

Problem Description:

If loading a CATDrawing and starting the migration in NXM11

it results with an error.

The arrows for the section views are not created.

==============================================================================

Material:

• POWERPOINT

• SYSLOGFILES

• PART

==============================================================================

Versions:

NX 11.0.0.33

Managed Mode: No

============================================================================== Containing:

8314630_ee46e132-7b49-11e6-8195-dd5e64b738b1.zip

==============================================================================

Steps to Duplicate:

1. open NXM11 (NX-Migration)

2. load a CATDrawing

3. start the migration in NXM11

4. load the migrated NX-File (Drawing) in NX11

Error:

the arrows for the section views are not created

Expectation:

The needed arrows for the sectionview should be created

=============================================================================

Work Around: Unknown

Problem is part specific: Unknown

Platform Information:

Problem is platform specific: Unknown

Platform: Intel Win764-bit

Problem verified on the following platforms and OS versions:

Intel Win764-bit, NX 11.0.0.33

==============================================================================

Additional Notes:

This is an issue with migrating a drawing.

It may end up coming back to drafting. The problem where Arrows for the section view not created has been investigated and the following has been found.

This problem when migrating a CATDrawing is being closed since it was previously agreed that Siemens PLM will not provide a fix for this problem.

PR 8314630 Product Information: Product: NX , Application: CMM , Version: V11.0