Problem about drafting datum symbol by CMM migration.

Problem about drafting datum symbol by CMM migration. PR Number:     7262595

Priority:     2

GTAC Urgency:     No

PR Matrix:     6a.

   ============================

Problem Description:

Problem about drafting datum symbol by CMM migration.

=============================================================================

NX Versions:     NX903,NX903MP2

CMM Versions:   CMM901, CMM902

Managed Mode:     n/a

Tc Versions:     n/a

Containing:

---

Part:          Yes

AVI:          n/a

Syslog:          n/a

Other Files:     Yes

Work Around:     n/a

Steps to Duplicate:

---

1)Do CMM migration using attached pkg file.

2)Open prt file.

Then, drafting datum symbol is not correct.

About detail, please see attached PPT.

---

Trace Back:

N/A:

Problem is part specific:     Unknown

Problem is OS specific:          Unknown

Platform Information-

---

Problem is platform specific:     Unknown   Platform:

Problem verified on the following platforms and OS versions:

NX Versions Tested In GTAC:  NX903,NX903MP2

OS Versions used during Test: Intel Win 7 64Bit This issue is currently open and under investigation. When the investigation completes, this article will be updated to include all of the pertinent information and conclusions. If you have further questions related to this article, or any article, please contact Support for assistance. PR 7262595 Product Information: Product: NX , Application: TRANSLATOR , Version: V9.0.2