[CMM] The problem that migration don't succeed in once.

[CMM] The problem that migration don't succeed in once. PR Number: 7552798

Priority: 2

GTAC Urgency: No

PR Matrix: 6a.

============================

Problem Description:

The problem that migration don't succeed in once

=============================================================================

NX Versions: NX10.0.2

CMM Versions: CMM10.0.1

Managed Mode: No

Tc Versions: n/a

Containing:

---

Part: Yes

AVI: n/a

Syslog: Yes

Other Files: Yes

Work Around: Remigrate same pkg.

Steps to Duplicate:

---

1)Start I-deas.

2)Select [File]-[Export].

3)Select [I-DEAS Library File] and [OK].

4)Expand Project / Library.

5)Select parts.

Then, the customer select hundreds files.

These parts are not used any assemblies.

6)Turn On "Export for Reference".

7)Input file name and click [Export].

8)Start cmmSolo.

9)Open pkg file.

10)Select [CMM]-[Migrate to NX].

Then, specified part is failed.

And, remaining parts are not migrated.

But, to this pkg, do [Migrate to NX] again.

Then, the part failed before is migrated.

And, remaining parts are migrated.

---

Trace Back:

N/A:

Problem is part specific: Unknown

Problem is OS specific: Unknown

Platform Information-

---

Problem is platform specific: Unknown Platform:

Problem verified on the following platforms and OS versions:

NX Versions Tested In GTAC: NX10.0.2

OS Versions used during Test: Intel Win 7 64Bit

Siemens PLM believes that the problem you reported where [CMM] The problem that migration don't succeed in once will be resolved by code changes made to the release of our product CMM version 10.0.3.The issue is caused by services being restarted after the 500th item.A workaround to this issue is the change the CMM Option "Restart services after PR 7552798 Product Information: Product: NX , Application: CMM , Version: V9.0.1