CMM Pro/E Assembly Drawing issue - Exploded View

CMM Pro/E Assembly Drawing issue - Exploded View IR Number: 1937430

       Priority:	1

Business Urgency: No

   GTAC Urgency:	No

  PR Matrix:	The problem can be reproduced easily with the data provided.

============================

SYMPTOM/PROBLEM

Environment setup:

NX 8.5.1.3

Creo elements/pro 5.0 (Pro/E Wildfire 5) m130

CMM 8.5.1.081

Migration data consist of one assembly with its drawing. The drawing has two sheet, one of them is an explodeded view of the hole assembly (see image 1).

Image 1: Drawing Sheet 2 - Exploded View

Migrated Drawing does not represent the exploded view of the assembly, all components are in its un-exploded position (see image 2).

Image 2: Migrated drawing Sheet 2 - components are not in exploded position

ANALYSES

~~~~~~~~~~

Migration was done with CMM 8.5.1 in unmanaged (CMM Solo) environment. 

All CMM options were set to default values except the following settings:

o	Geometry migration --> Brep Mode

o	Remigration --> disabled

o	Cleanup Scratch Files --> None

HOW TO REPRODUCE THE PROBELM:

Download the provided data file from GTAC (File: 1937430.zip)

o Import data within Teamcenter (optional)

o Open Pro/E and load drawing 44012_0000_010.drw.11

Result should look something similar like image 3. There should be no error messages when loading the drawing

Image 3: Drawing loaded within Pro/E

o Close Pro/E and start CMM Solo

o Load the drawing file into CMM Solo interface using File - Open

During loading of the components some error do pop up about missing referenced files. These file are really missing in the provided data BUT this was no problem for Pro/E to open and display the drawing correctly.

o Migrate provided drawings with CMM using default cmmOptions

o Inspect migrated NX drawing - the sheet 2 does not represent the exploded view

Image 3: migrated drawing with drawing overlay

SUPPORTING DATA:

1937430.zip

--------------------------------------------------

Uploading : IR1937430.zip

(54.629.237 bytes)

Upload started ...Upload completed

--------------------------------------------------

o	PDF document with description and screenshots

o	CMM Scratch Folder with logfiles from migration:	CMMScratchExplo_02

o	Customer Pro/E data:	explo_02_proe

o	Migrated NX data:	explo_02_nx

WORKAROUND:

~~~~~~~~~~~~~

Nothing found

PLATFORM:

~~~~~~~~~~

Windows

PLATFORM SPECIFIC:

N/A

SOFTWARE VERSIONS

NX 8.5.1.3

Creo elements/pro 5.0 (Pro/E Wildfire 5) m130

CMM 8.5.1.081

VERSION SPECIFIC:

~~~~~~~~~~~~~~~

N/A

ADDITIONAL INFORMATION:

This PR has been reviewed by development. Due to the low priority of the problem and the length of time the current behavior has been in the system we do not intend to fix this PR. If the problem is still impacting your day to day operation as you use the NX product, please contact GTAC to have the PR reopened. PR 1937430 Product Information: Product: NX , Application: TRANSLATOR , Version: V8.5.1