Create a Hole Series feature

This example shows how to create a Hole Series feature through three parts in an assembly.

1. Choose Home tab → Base group → Hole.
2. Select Top Border bar → Selection Scope list → Entire Assembly, and click Create Interpart Link.
3. In the Hole dialog box, from the type list, select Hole Series.
4. In the graphics window, click on the near face of the component for the start face (specified face as the sketch plane).
5. Highlight the edge of the arc and select the arc center (Specify Arc Center).
6. Click OK.
7. Click Finish.
8. In the Specification group, specify values for the Start, Middle, and End hole dimensions:
   • Start body
   • Middle body
   • End body
9. Click OK to create a Hole Series feature in the assembly.

Note: The linked face created by the hole series may cover the hole start. To hide the linked face, in the Part Navigator, right-click the Linked Face and choose Hide.

Related

• Create a countersunk hole
• Create a screw clearance hole
• Create a hole on a nonplanar surface
• Create positive holes when a target body does not exist
• Customize standard data tables for hole features
• Hole, Hole Series, Editing a Hole Series feature
• Hole dialog box

---

Create a Hole Series feature, NX 2212 Series © 2023 Siemens