CMM migrated drawing is imported to Teamcenter, drawing view is deleted.

CMM migrated drawing is imported to Teamcenter, drawing view is deleted. PR Number: 7305014

Priority: 2

GTAC Urgency: No

PR Matrix: 6b.

============================

Problem Description:

CMM migrated drawing is imported to Teamcenter, drawing view is deleted.

=============================================================================

NX Versions: NX9.0.3.4

CMM Versions: CMM903

Managed Mode: Yes

Tc Versions: TC10.1.2

Containing:

---

Part: Yes

AVI: Yes

Syslog: n/a

Other Files: Yes

Work Around: Change the importing order.Firstly import Draw part, secondary import Assy part.

Steps to Duplicate:

---

• I-deas

1)Start I-deas.

2)In Master Assembly, create new assy and part.

Assy

|_Part1 -> BLOCK

3)Create new part.

Part2 -> CYLINDER

4)In Master Drafting, create new drawing.

Draw

|_Part1 -> one view

|_Part2 -> one view

5)Check in these items.

6)Export pkg file.

->Assy.pkg and Draw.pkg

• CMM-solo

1)Open Assy.pkg

2)Do [Migrate to NX].

3)Open Draw.pkg

4)Do [Migrate to NX].

->AssyPart folder and DrawPart folder

• NX

1)Start NX from Teamcenter.

2)Select [File]-[Import Assembly into Teamcenter].

3)Click [Add Assembly], select Assy part.

4)Click [Execute].

5)Assign PartNumber and Revison to Assy and Part1.

6)Close [Import Assemly].

7)Select [File]-[Import Assembly into Teamcenter].

8)Click [Add Assembly], select Draw part.

9)Change "Default Import Action" to "Use Existing".

10)Click [Execute].

11)Assign PartNumber and Revison to Assy and Part1.

Then, Part1 is used existing Item.

Draw is assigned new ItemID.

12)Close [Import Assemly].

13)Open Draw Item.

Then, Part1 view is deleted.

---

Trace Back:

N/A:

Problem is part specific: Unknown

Problem is OS specific: Unknown

Platform Information-

---

Problem is platform specific: Unknown Platform:

Problem verified on the following platforms and OS versions:

NX Versions Tested In GTAC: NX9.0.3.4

OS Versions used during Test: Intel Win 7 64Bit The problem where CMM migrated drawing is imported to Teamcenter, drawing view is deleted has been investigated and the following has been found.

The use case described here is not supported. This is designed as intended. The issue is that two different I-deas part files are created for Part1 by the migration processes.

PR 7305014 Product Information: Product: NX , Application: CMM , Version: V7.5.5